NEC Univerge SV9100 System Hardware Manual page 305

Issue 3.0
SV9100 System Hardware Manual
The blade provides:
Eight Digital Station ports

Two analog extension ports support Caller ID Circuit, Message

Waiting Lamp Control (Controlling Voltage:-110Vdc) for all ports
Two status LEDs

Refer to the following tables for maximum upgrade capacities of the
GCD-LTA blade:
Table 2-6 SV9100 Maximum 9.5" Gateway and 19" System Capacities

– Blades on page 2-12
Table 2-7 SV9100 Maximum 9.5" Base and Expansion System

Capacities – Blades on page 2-14
4.7.2 Installation
Install the GCD-LTA blade in any available universal slot.
CAUTION
When connecting a fax machine or analog modem, make
❍
sure to set Program 15-03-03 to 1 (special terminal) to avoid
communication problems.
The GCD-LTA is categorized as TNV2. With this
❍
designation, off-premise wiring is not acceptable.
Branch connection is not acceptable.
❍
4-55