Figure 9-15 Pgd(2)-U10 Adp Cable Connection - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
7.3
SV9100 System Hardware Manual

Figure 9-15 PGD(2)-U10 ADP Cable Connection

Programming
10-03-01 : ETU Setup – Terminal Type (Circuit 1)

10-03-06 : ETU Setup – Terminal Type (Circuit 2)
Confirm that the PGD(2)-U10 ADP has defined the circuit as either type 7
for External Ringer or 9 for ACIs. (If the PGD(2)-U10 ADP circuit was
previously defined for another type of circuit, unplug the
PGD(2)-U10 ADP and plug it back in to reset the circuit type.)
10-05-01 : General Purpose Relay Setup

Define which relay circuits (5 ~ 8) on the PGD(2)-U10 ADP are used for
General Purpose Relays.
11-06-01 : ACI Extension Numbering

Assign extension numbers to ACI software ports. Select a number outside
of the normal extension number range.
ACI Ports 1 ~ 96
9-19