Table 6-1 Firmware Compatibility Matrix - NEC Univerge SV9100 System Hardware Manual

S 4 B
ECTION LUETOOTH
4.1
Terminal
Number
DT-330

6-24
C
ORDLESS
Bluetooth Cordless Handset (BCH) Interface
This optional interface allows the multiline terminal user to use Bluetooth
technology to provide a cordless handset. This handset provides:
Keyset-like Handset

Eight Line Buttons

Function Button

Dial Button

Display

All Multiline Terminal Functions with Main Unit

Cradle Charges Handset

Base Side RF Block (50 meters, Class 1)

Bluetooth Distance: 50 Meters

Up to 16 devices can be installed within a 100m (open area, ex: outdoors) or 50m
(confined/blocked area, ex: indoors) radius and each device is located with 1
meter between each device simultaneously. This maximum can be affected by the
installation environment.
The BCH and a Bluetooth headset (BTH) cannot be used at the same time. When
using a Bluetooth headset in place of the handset, the Plantronics Voyager 510
headset is recommended.

Table 6-1 Firmware Compatibility Matrix

xxx I xx or lower
Lot
(Version 8.10 and 1, E0 or lower)
xxxJxx or higher
(Version 2.20 or higher)
BCH Support may differ based on terminal firmware. To verify both DT-330 terminal and BCH-
L Unit firmware, hold down keypad buttons 1, 2 and 3 while plugging the line cord into the
terminal.
H
ANDSET
xxxDxx or lower
Supported
Not supported
BCH-L Unit Lot Number
xxxExx or higher
Supported
Supported
Installing SV9100 Cordless Telephones
Issue 3.0