Installing Pci Board - NEC Express5800/320Lb User Manual

Installing PCI Board

Follow the procedure below to install the board to be connected to the PCI board slot.
NOTE: To install the PCI board, make sure the shape of the board
connector matches with the shape of the PCI board slot connector.
Remove the PCI module.
1.
Remove the PCI module's top cover.
2.
Identify the slot to which you want to install a PCI board and remove the connector cap.
3.
IMPORTANT: Carefully keep the removed connector cap.
To install a long card, loosen the setscrew, slide the bracket, and secure it with the
4.
setscrew.
Pull the PCI board retainer bracket from the inside.
5.
Unscrew the setscrew of the additional slot cover at the same position (level) as the target
6.
slot, and remove the slot cover.
IMPORTANT: Carefully keep the removed additional slot cover.
Screw
Bracket
System Upgrade 8-59