Table 8-2 Sip Conference Max Programming Options - NEC Univerge SV9100 System Hardware Manual

2.4
8-4
Programming Options
To enter Programming mode, press and hold REDIAL until a diamond arrow is
displayed on the LCD. Then press the applicable key and follow the instruction in
Table 8-2 SIP Conference Max Programming

Table 8-2 SIP Conference Max Programming Options

Menu Option Key
Ringer Melody 1
Dialing Mode 2
Flash Duration 3
4

Local Number
5

Conference
6

Service
Press CLEAR to return the previous menu. Press and hold to exit programming without

saving changes.
*
Press and hold 1 to enter hyphen or
Press CLEAR before entering a new number.
Options.
Programming
Press REDIAL. The current melody selection flashes.
Press 1~5 to change melody. Press REDIAL to save the
selection.
Press REDIAL. The current dialing selection flashes. Press
1 for tone or 2 for pulse. Press REDIAL to save the
selection.
Press REDIAL. The current duration flashes. Press 1~5 to
select duration as follows:
1 = 600ms
2 = 300ms
3 = 150ms
4 = 100ms
5 = 80ms
Press REDIAL to save the selection.
Press REDIAL. Enter the telephone number that you want
displayed on the LCD in standby mode. Press REDIAL to
save the number.
Press REDIAL. Enter the telephone number you want the
conference key to dial. Press REDIAL to save the number.
Press REDIAL. Enter the telephone number you want the
O key to dial. Press REDIAL to save the number.
*
to enter a space in the number.
Installing SV9100 Conference Solutions
Issue 3.0