Installing The 9.5" Base (Chs2Ug B-Us) And Expansion (Chs2Ug E) Chassis; Figure 3-28 9.5"Base And Expansion (Combined) Chassis - NEC Univerge SV9100 System Hardware Manual

3.5
3-24
Installing the 9.5" Base (CHS2UG B-US) and Expansion
(CHS2UG E) Chassis
The CHS2UG B-US and CHS2UG E chassis combined have six universal blade
slots for legacy line/trunk blade (Single Line Telephone Interface, Digital multiline
terminal Interface, Central Office Trunk, ISDN PRI Interface, etc.), In-skin
Application Blades (In-skin UMS, In-Skin Router, etc.). It also houses the BUS
Interface Blade and Power Supply Unit (PSU).
When the GCD-CP10 blade is installed in slot 1 of the 9.5" Base Chassis, it is
called the controlling chassis. Additional chassis, (9.5" Expansion Chassis) can be
installed to increase the capacity of the system to meet the customer's business
needs.
Before proceeding with installation of chassis, ensure site preparation is
completed. The combined chassis can be:
Wall-mounted – refer to

and Expansion (CHS2UG E) Chassis on page
Rack-mounted – refer to

Expansion (CHS2UG E) Chassis on page

Figure 3-28 9.5"Base and Expansion (Combined) Chassis

Base Chassis
CHS2UG B-US
GPZ-BS10 or
GPZ-BS11 Slot
Power Switch
and LED
3 Universal Slots
(Slot 1 for CPU)
4.2.1.1 Wall Mounting the 9.5" Base (CHS2UG B-US)
3-54.
7.2 Rack Mounting the 9.5" Base (CHS2UG B-US) and
3-84.
Issue 3.0
Expansion Chassis
CHS2UG E
3 Universal Slots
Installing the SV9100 Chassis