Figure 5-66 Install Screw - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
11. Holding the LCD in place, turn the multiline terminal button
side down.
12. Install the screw (refer to

Figure 5-66 Install Screw

Side Panel
13. Attach the side panel to the side of the 8LKD (LD)-L UNIT
(refer to Figure 5-72 Install Screw on page
14. Return the multiline terminal to the buttons side up.
15. Connect the line cord/LAN cable and the AC/DC adapter to
the DTL multiline terminal.
Figure 5-66 Install Screw).
Screw
5-71).
5-67