Table 2-3 Sv9100 9.5" (Base And Expansion) Maximum System Capacities - Trunks/Ports/Channels - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
Table 2-3 SV9100 9.5" (Base and Expansion) Maximum System Capacities – Trunks/Ports/Channels
Number of:

Number of Timeslots
DT400/DT300 TDM (-48V)
SLT (-28V)
SLT (-48V)
DT800/DT700 IP
Desktop Applications
(Desktop Client, Desktop Client with
Shared Services and SoftPhones)
SIP/WLAN
Analog Trunks (COT)
BRI
PRI (1.5M)
IP Trunk (SIP)
DTMF Receivers
VoIP Channels
Voice Mail Channels on CPU
Modem

1 = For-law countries 104 timeslots per chassis are assigned the G.711 PCM communications (e.g., voice
communications) and 7 timeslots per chassis are assigned for the Data communications (e.g., HDLC over ISDN). Thus
the simultaneous data communications are limited up to seven per chassis.

2 = An additional 64 DTMF Receivers are available when the GPZ-BS10 is installed.
If using Caller ID to analog trunks and DSP resources are set to common, DSP resources will only be used for analog

trunks and not analog stations.
SV9100 System Hardware Manual
The maximum slot and channel capacities are listed in
(Base and Expansion) Maximum System Capacities –
9.5"
Base
(CPU + 2
Slots)
PCM
1
Data
9.5" Base + Expansion
x 1
x 1 x 2
(6 Slots) (12 Slots)
48 104 208
7 7 14
32 80 176
32 80 176
8 20 44
896
256
896
16 40 88
16 40 88
48 96 192
400
32 32
256
16 channels
1 channel
Table 2-3 SV9100 9.5"
Trunks/Ports/Channels.
System
Maximum
x 3 X4
(18 Slots) (24 Slots)
312 416
21 28
272 368
272 368
Total 896
68 92
Total 256
Total 896
136 184
136 184
Total 400
192 192
32 32
416
28
96 *2
256
16
1
2-9