Figure 6-9 Placing The Base Unit On The Posts Of The Wall Plate; Figure 6-10 Plugging The Ac Adapter Into The Ac Wall Outlet - NEC Univerge SV9100 System Hardware Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

SV9100 System Hardware Manual

Place the base unit on the posts of the wall plate and push down until it is

firmly seated.

Figure 6-9 Placing the Base Unit on the Posts of the Wall Plate

Plug the AC adapter into a standard 120 Vac wall outlet.

Do not use an outlet controlled by a wall switch.

Because of variation in wall plates, this method is not

recommended.

Table of Contents