Figure 3-122 Removing Battery Tray Bracket; Figure 3-124 Installing Battery Connection Cable; Figure 3-125 Connecting Battery Cables - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
10. Using two screws, install the Battery Tray Bracket. Refer to
3-122 Removing Battery Tray Bracket on page

Figure 3-124 Installing Battery Connection Cable

11. Insert Battery Connection Cable into cable guides. Refer to
3-124 Installing Battery Connection
12. Install the Battery Tray Cover and tighten the two screws. Refer to
Figure 3-124 Installing Battery Connection
13. Slide the Battery Trays into the CHSG LARGE BATT BOX.
14. Install the Battery Tray Suppressor while pulling the Battery
Connection Cable(s) through the cutouts provided. Refer to
3-125 Connecting Battery Cables on page
screws.
15. Plug the Battery Connection Cable(s) into the Fuse Unit. Refer to
Figure 3-125 Connecting Battery Cables on page
Figure
3-96.
Figure
Cable.
Cable.
Figure
3-98. Secure with two
3-98.
3-97