Figure 9-34 Voice Security Recorder Connection - NEC Univerge SV9100 System Hardware Manual

11.4 Operation Note
9-42
Password

Locks access to these settings and those at the user level.
CAUTION

Figure 9-34 Voice Security Recorder Connection

Use the Options and File Management tabs in the D
Recorder application to adjust the program settings as required (directory for
storing messages, message deletion, file format, etc.).
It is recommended, after the initial installation of the D
Recorder application, that the audio balance of the remote side be changed to
approximately 100%.
term
1. Open the D Voice Security Recorder application.
2. Click the Options tab.
3. Using the up arrow button, change the Remote Boost (%) setting to 100%.
Excessive boost can distort audio.
IMPORTANT
When changes are made, the application must be closed
and started again to become effective.
term ®
term
Installing SV9100 Optional Equipment
Issue 3.0
Voice Security
Voice Security