Figure 9-122 Grooved Cutout For Serial Cable; Figure 9-123 Insert Stopper For Handset Use - NEC Univerge SV9100 System Hardware Manual

Issue 3.0
SV9100 System Hardware Manual
10. Gently press the serial cable into the grooved cutout for the cable.

Figure 9-122 Grooved Cutout for Serial Cable

11. Connect the serial connection cord (refer to
PSA-L UNIT to the Multiline Terminal on page
UNIT to the terminal body.
12. Open the Dip Switch Cover (refer to
Connections on page
to the required position. Close the cover.
13. If using the handset, place the stopper in the tilt leg.

Figure 9-123 Insert Stopper for Handset Use

Cable Groove
Figure 9-121 Attach
9-136) from the PSA-L
Figure 9-117 PSA-L UNIT
9-134). Set the dip switch on the PSA-L adapter
9-137