M.2 Sata Ssd Kit (To Be Supported); Install 2X M.2 Sata Ssd Kit - NEC Express5800 Series User Manual

Chapter 2 Preparations
1.20
2x M.2 SATA SSD Kit (To be supported)
M.2 SATA SSD Kit (Optional) can install the M.2 SATA SSD (Optional, Max 2).
1.20.1

Install 2x M.2 SATA SSD Kit

Please prepare the following before installing the options.

Parts included in the option kit

Phillips screwdriver
To install the components, follow these steps.
1. Back up all data in the server.
2. See steps 1 to 7 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
3. Attach M.2 SSD to the M.2 SSD assembly board that is in the M.2 SATA SSD kit.
Insert the M.2 SSD (with the M.2 SSD assembly board) to the connector at 45degree then recline it toward
to the board. Fix the M.2 SSD to the board with one screw. Repeat the same process for 2
4. Attach SATACable to the M.2 SSD assembly board.
5. See Chapter 2 (1.10 Riser Card) to remove the Riser Card that will be attached the M.2 SSD assembly
board.
126
Note
In order to prevent the damage to electronic components, please start to install the system
after conducting the appropriate anti-static treatment. There is a possibility of causing
electrostatic discharge if appropriate grounding wire treatment is not conducted.
Express5800/R120h-2E User's Guide
1. Installing Internal Optional Devices
nd
M.2 SSD.