Revision History - HGST Ultrastar Data102 User Manual

User Guide

Revision History

Date Revision
November Revision 1.0
2017
November Revision 1.1
2017
December Revision 1.2
2017
January 2018 Revision 1.21
January 2018 Revision 1.3
April 2018 Revision 1.4
May 2018 Revision 1.5
Initial Release
• The crossbar on the CMA was changed. See
Description
(page 46).
• Removed Lowline power specs from
(page 10).
• Changed required rack depth, see
(page 5).
• Changed typical power consumption, see
Consumption
(page 4).
• Updated LED Flash Patterns, see
• Added active cable support
• Added firmware upgrade section. See
(page 205).
• Updated the Non-Op altitude specification. See
Operational Altitude
Updated the product name
• Updated information on the 2.5" drive carrier option. See
Drive Carrier Description
• Added torque requirements for all screws used in the
enclosure.
• Updated the IOM replacement section to account for the
possibility of a firmware mismatch. See
(page 58).
• Updated the drive assembly installation instructions to clarify
the orientation of the drive assemblies.
Replacement
(page 77).
• Updated Compatible Drives List. See
Drives
(page 17).
• Updated the Rack Requirements. See
Rack Requirements
• Updated the Firmware Upgrades. See:
(page 205)
Added the Part Replacement Service Window. See:
Replacement Service Window
vii
Revision History
Comment
Power Requirements
Required Rack Depth
Typical Power
LEDs
(page 8).
Firmware Upgrade
(page 3).
(page 53).
IOM Replacement
Drive Assembly
List of Compatible
Ultrastar Data102
(page 11).
Firmware Upgrade
(page 58)
CMA
Non-
2.5"
Part