HGST Ultrastar Data102 User Manual page 231

User Guide
0000000077010524 Active/Optimized 001|005|036|000 0 Adapter:
Avago
Adapter, SAS3 3008 Fury -StorPo... (B|D|F:
134|000|000) Controller: 46616B65436F6E74726F6C6C6572 (State:
Active)
0000000077000431 Active/Optimized 000|004|049|000 0 Adapter:
Avago
Adapter, SAS3 3008 Fury -StorPo... (B|D|F:
132|000|000) Controller: 46616B65436F6E74726F6C6C6572 (State:
Active)
MPIO Disk98: 02 Paths, Least Blocks, ALUA Not Supported SN:
5000CCA2532558CC
Supported Load Balance Policies: FOO RR RRWS LQD WP LB Path ID
State SCSI
Address Weight
-------------------------------------------------------------------
0000000077010523 Active/Optimized 001|005|035|000 0 Adapter:
Avago
Adapter, SAS3 3008 Fury -StorPo... (B|D|F:
134|000|000) Controller: 46616B65436F6E74726F6C6C6572 (State:
Active)
0000000077000430 Active/Optimized 000|004|048|000 0 Adapter:
Avago
Adapter, SAS3 3008 Fury -StorPo... (B|D|F:
132|000|000) Controller: 46616B65436F6E74726F6C6C6572 (State:
Active)
MPIO Disk97: 02 Paths, Least Blocks, ALUA Not Supported SN:
5000CCA253255E9C
Supported Load Balance Policies: FOO RR RRWS LQD WP LB Path ID
State SCSI
Address Weight
-------------------------------------------------------------------
...
6. Issue the following command to activate IOM B:
sg_ses SCSI<dev> -p4 -c -d 02,00,01,01
7. Ensure Windows MPIO can see all paths to the drives after activating IOM B.
a. Execute the following command:
C:\mpclaim.exe –v C:\Desktop\mpclaim_output.txt
b. Verify there are two paths to each drive by issuing the following command:
C:\more C:\Users\Administrator\Desktop\mpclaim_output.txt
221
5. System Management
5.1 Firmware Upgrade