HGST Ultrastar Data102 User Manual page 19

User Guide
Figure 5: Front LEDs
2
1
From the rear there are the three enclosure status LEDs and LEDs on the Ethernet and SAS ports.
Table 7: Front LED Identification
Number LED Name
1 Identify
2 Fault
3
Color
Blue Blink @ 1 Hz – Blinks only when Identification has
been activated. Will blink when any component is
identified.
Amber
Blink @ 1 Hz –Enclosure has a fault
9
1. Overview
Behavior
1.7 LEDs