Table of Contents
Advertisement
User Guide
6 Drives missing in the system management
Condition
The system management is reporting a drive or drives as missing or not installed.
Cause
The drive or drive may not be properly seated onto the connector on the board.
Solution
1. Grasp both handles at the front of the enclosure and pull with even pressure to extend
the chassis out of the rack until it is stopped by the safety latches. The safety latches
will prevent the enclosure from coming out of the rack completely and the cover will
remain in the rack attached to the rear alignment brackets.
6. Drives missing in the system management
281
5.5 Daisy Chaining
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Ultrastar Data102 and is the answer not in the manual?
Questions and answers