Lead Wire Connection; Attach Option Card - YASKAWA V1000 Series Installation & Start-Up Manual

Figure 7.19
A – Line up the tab with the mounting
hole.
Note: Gently pack wires to fit behind the left and right side of the cover into the provided recess.
5.
Connect the lead from the drive ground terminal to the same terminal as the option
card lead.
The option card lead should exit through the holes provided on the underside of the
drive as it gets routed passed the ground terminal.
Figure 7.20
A – Drive ground terminal
B – Route the lead wire on the inside of
the lower cover.
C – Ground lead
YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation & Start-Up Manual
7.6 Connecting an Option Card
A
B
Figure 7.19 Attach Option Card
E
D
C
Figure 7.20 Lead Wire Connection
B – Line up the tab with the mounting
hole.
A
B
D – Ground lead through-hole
E – Ground lead
7
287