Section Safety - YASKAWA V1000 Series Installation & Start-Up Manual

5.1 Section Safety

5.1 Section Safety
Do not connect or disconnect wiring while the power is on.
Failure to comply will result in death or serious injury.
Do not operate equipment with covers removed.
Failure to comply could result in death or serious injury.
The diagrams in this section may illustrate drives without covers or safety
shields to display details. Be sure to reinstall covers or shields before
operating the drives and run the drives according to the instructions
described in this manual.
Always ground the motor-side grounding terminal.
Improper equipment grounding could result in death or serious injury by
contacting the motor case.
Do not touch terminals before the capacitors have fully discharged.
Failure to comply could result in death or serious injury.
Before wiring terminals, disconnect all power to the equipment. The
internal capacitor remains charged even after the drive input power is
turned off. The charge indicator LED will extinguish when the DC bus
voltage is below 50 Vdc. To prevent electric shock, wait at least five
minutes after all indicators are off and measure the DC bus voltage level to
confirm safe level.
174
Electrical Shock Hazard
Electrical Shock Hazard
YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation & Start-Up Manual
DANGER
WARNING