YASKAWA V1000 Series Installation & Start-Up Manual page 63

Figure 3.12
Figure 3.12 Reattach the Protective Covers on an IP20/Open-Chassis Drive
◆
IP20/NEMA Type 1
Removing the Protective Covers on an IP20/NEMA Type 1 design
■
1.
Loosen the screw on the front cover to remove the front cover.
Figure 3.13
Figure 3.13 Remove the Front Cover on an IP20/NEMA Type 1 Drive
2.
Loosen the screw on the terminal cover
cover and expose the conduit bracket
Figure 3.14
Figure 3.14 Remove the Terminal Cover on an IP20/NEMA Type 1 Drive
3.
Loosen two screws attaching the conduit bracket
YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation & Start-Up Manual
3.5 Protective Covers
(Figure 3.14, B) to remove the terminal
(Figure 3.14, A).
A
B
(Figure 3.15, A) to remove.
3
63