Operator Related Parameters; O1: Display Settings - YASKAWA V1000 Series Installation & Start-Up Manual

B.2 Parameter Table
◆
o: Operator Related Parameters
O parameters are used to set up the LED digital operator displays.
No. Name
o1-01 Drive Mode Unit
Monitor Selection
<22>
User Monitor
o1-02
Selection After Power
<22>
Up
Digital Operator
o1-03
Display Selection
Frequency Reference
o1-10 Setting and User-Set
Display
Frequency Reference
o1-11 Setting / Decimal
Display
366
Use o1 parameters to configure the digital operator display.
Selects which monitor will be displayed in the
operation menu upon power-up when
o1-02 = 5. The monitor parameter number is
entered into the spaces provided: U -
For example, set "403" to display monitor
parameter U4-03.
Selects the monitor to display upon power-up.
1: Frequency Reference (U1-01)
2: Forward/Reverse
3: Output Frequency (U1-02)
4: Output Current (U1-03)
5: User Monitor (set by o1-01)
Sets the units to display the frequency
reference and output frequency.
0: Hz
1: % (100% = E1-04)
2: r/min (enter the number of motor poles into
E2-04/E4-04/E5-04)
3: User defined by parameters o1-10 and o1-11
These settings define the display values when
o1-03 is set to 3.
o1-10 sets display values when operating at the
maximum output frequency.
o1-11 sets the position of the decimal
positions.
YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation & Start-Up Manual
Description

o1: Display Settings

o1-10: Sets the first five
digits of the value,
disregarding the
decimal point.
o1-11: Sets the number
of digits past the
decimal point
Control
Mode
Range Def.
O
V/
L
f
V
104 to
106 A A A 500
621
.
Set to U1-06 as a default
(Output Voltage Reference).
1 to 5 1 A A A 501
0 to 3 0 A A A 502
1 to
A A A 520
<11>
60000
0 to 3 A A A 521
<11>
Addr. Pg.
P
Hex
M
—
—
—
—
—
—