Start-Up Flowcharts; Flowchart A: Basic Start-Up And Motor Tuning - YASKAWA V1000 Series Installation & Start-Up Manual

4.4 Start-up Flowcharts

4.4 Start-up Flowcharts
The flowcharts in this section summarize basic steps required to start-up the drive. Use the
flowcharts to determine the most appropriate start-up method for a given application. The
charts are intended as a quick reference to help familiarize the user with start-up procedures.
Refer to Basic Drive Setup Adjustments on page 122
proper drive start-up.
Flowchart Subchart
A
A-1
A-2
A-3
-
◆

Flowchart A: Basic Start-Up and Motor Tuning

Figure 4.6, Flowchart A, describes basic start-up sequence for the drive and motor system.
This sequence varies slightly depending on application. Use drive default parameter settings
in simple applications that do not require high precision.
106
Basic start-up procedure and motor tuning.
Simple motor set-up with Energy Savings or Speed Search using V/f
mode.
High-performance operation using Open Loop Vector (OLV) motor
control.
Operation with Permanent Magnet (PM) motors.
Set-up of drive using application specific selections.
Presets on page 111
YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation & Start-Up Manual
and perform all checks to ensure a
Objective
Refer to Application
Page
106
108
109
110
-