YASKAWA V1000 Series Installation & Start-Up Manual page 90

4.1 Section Safety
Observe proper electrostatic discharge procedures (ESD) when
handling the drive and circuit boards.
Failure to comply may result in ESD damage to the drive circuitry.
Never connect or disconnect the motor from the drive while the drive
is outputting voltage.
Improper equipment sequencing could result in damage to the drive.
Do not use unshielded cable for control wiring.
Failure to comply may cause electrical interference resulting in poor
system performance. Use shielded twisted-pair wires and ground the shield
to the ground terminal of the drive.
Do not allow unqualified personnel to use the product.
Failure to comply could result in damage to the drive or braking circuit.
Carefully review instruction manual TOBPC72060000 when connecting a
braking option to the drive.
Do not modify the drive circuitry.
Failure to comply could result in damage to the drive and will void
warranty.
Yaskawa is not responsible for any modification of the product made by the
user. This product must not be modified.
Check all the wiring to ensure that all connections are correct after
installing the drive and connecting any other devices.
Failure to comply could result in damage to the drive.
90 YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation & Start-Up Manual
NOTICE