Enter Data From The Motor Nameplate - YASKAWA V1000 Series Installation & Start-Up Manual

4.7 Test Run
4. Press to display the value for T1-01.
Press to select the digit to edit.
5.
Press and set the drive to perform Rotational Auto-Tuning
6.
(00).
Save the setting by pressing
7.
8. The display automatically returns to the screen shown in Step 3.
9. Press the

Enter Data from the Motor Nameplate

After selecting the type of Auto-Tuning, enter the required data from the motor nameplate.
Note: These instructions continue from Step 7 in Selecting the Type of Auto-Tuning.
1. Press to access the motor output power parameter T1-02.
Press to view the default setting.
2.
3.
Press to select the digit to edit.
Press and enter "0.2." Enter value based on motor
4.
nameplate data.
5.
Press to save the setting.
6. The display automatically returns to the screen shown in Step 1.
158
Step
.
key until back at the Top Screen.
Step
YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation & Start-Up Manual
Display/Result
⇒
⇒
⇒
⇒
⇒
⇒
Display/Result
⇒
⇒
⇒
⇒
⇒
⇒