YASKAWA V1000 Series Installation & Start-Up Manual page 38

2.1 Section Safety
2.1 Section Safety
Provide sufficient cooling when installing the drive inside an enclosed
panel or cabinet.
Failure to comply could result in overheating and fire.
When multiple drives are placed inside the same enclosure panel, install
proper cooling to ensure air entering the enclosure does not exceed 40 °C.
Do not carry the drive by the front cover.
Failure to comply may result in minor or moderate injury from the main
body of the drive falling.
Observe proper electrostatic discharge (ESD) procedures when
handling the drive.
Failure to comply could result in ESD damage to the drive circuitry.
It may be difficult to perform maintenance on the cooling fans of
drives installed in a vertical row inside an enclosure.
Ensure adequate spacing at the top of the drive to perform cooling fan
replacement when required.
38
Crush Hazard
YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation & Start-Up Manual
WARNING
Fire Hazard
CAUTION
NOTICE