Changing Parameter Settings Or Values; Verifying Parameter Changes: Verify Menu - YASKAWA V1000 Series Installation & Start-Up Manual

4.3 The Drive and Programming Modes
◆

Changing Parameter Settings or Values

This example explains changing C1-01 (Acceleration Time 1) from 10.0 seconds (default) to
20.0 seconds.
1. Turn on the power to the drive. The initial display appears.
Press the key until the Setup Mode Screen appears.
2.
3. Press the
Scroll through parameters by pressing the
4.
appears.
5. Press to view the current setting value (10.0 seconds).
(Number farthest to the left flashes)
6.
Press until the desired number is selected. ("1" flashes)
7.
Press the key and enter 0020.0.
8. Press and the drive will confirm the change.
9. The display automatically returns to the screen shown in Step 4.
10. Press the
◆

Verifying Parameter Changes: Verify Menu

The Verify Menu lists edited parameters from the Programming Mode or as a result of Auto-
Tuning. The Verify Menu helps determine which settings have been changed, and is
particularly useful when replacing a drive. If no settings have been changed and all
parameters remain at the original default settings, then the Verify Menu will read
The Verify menu also allows users to access and re-edit edited parameters.
Note: The Verify Menu will not display parameters from the A1 group (except for A1-02) even if those
parameters have been changed from default settings.
102
Step
key to view the parameter setting display.
key until back at the initial display.
YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation & Start-Up Manual
⇒
⇒
⇒
key until C1-01
⇒
⇒
⇒
⇒
⇒
⇒
⇒
Display/Result
.