YASKAWA V1000 Series Installation & Start-Up Manual page 99

Output Voltage Reference
(Default setting)
Drive Mode
Monitor Display
Verify Function
Programming
Mode
Parameter Setting
Auto-Tuning
YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation & Start-Up Manual
4.3 The Drive and Programming Modes
Scroll through o1-01 (User Monitor Selection) until the desired
contents appear.
Monitor parameters (U-parameters) are displayed.
Drive Status Monitors: U1-01 to U6-19 on page
Lists all parameters that have been edited or changed from default
settings.
on page
A select list of parameters necessary to get the drive operational
Setup
quickly.
Mode on page
depending on the setting of A1-06 (Application Preset).
Application Presets on page
Allows the user to access and edit all parameter settings.
to Parameter List on page
Motor parameters are calculated and set automatically.
Auto-Tuning on page
Refer to Parameter List on page 305
Refer to Verifying Parameter Changes: Verify Menu
102.
Refer to The Setup Group within the Programming
101. Note: Parameters to be displayed differ
111.
305.
153.
Refer to
150.
4
Refer to
Refer
Refer to
99