YASKAWA V1000 Series Installation & Start-Up Manual page 340

B.2 Parameter Table
H1-
Function
Setting
FWD/REV Command (2-wire
43
sequence 2)
44 Offset Frequency 1 Addition
45 Offset Frequency 2 Addition
46 Offset Frequency 3 Addition
DC Injection Braking
60
Command
61 External Search Command 1
62 External Search Command 2
65 KEB Ride-Thru 1 (N.C.)
66 KEB Ride-Thru 1 (N.O.)
67 Communications Test Mode
68 High-Slip Braking
6A Drive Enable
75 Up 2 Command
76 Down 2 Command
7A KEB Ride-Thru 2 (N.C.)
7B KEB Ride-Thru 2 (N.O.)
7C Short-Circuit Braking (N.O.)
7D Short-Circuit Braking (N.C.)
7E Forward/Reverse Detection
9F DriveWorksEZ enable
340
H1 Multi-Function Digital Input Selections
Open: Reverse
Closed: Forward Note: Can not be set together with
Settings 40 or 41.
Closed: Adds d7-01 to the frequency reference.
Closed: Adds d7-02 to the frequency reference.
Closed: Adds d7-03 to the frequency reference.
Closed: Triggers DC Injection Braking (b2-02)
Closed: Activates Current Detection Speed Search from
the max. output frequency (E1-04) if b3-01=0. Activates
Speed Estimation Type Speed search if b3-01 =1.
Closed: Activates Current Detection Speed Search from
the frequency reference b3-01=0. Activates Speed
Estimation Type Speed search if b3-01 =1.
Open: KEB Ride-Thru 1 enabled
Closed: Normal operation
Open: Normal operation
Closed: KEB Ride-Thru 1 enabled
Tests the MEMOBUS/Modbus RS-485/422 interface.
Closed: High-Slip braking is executed. Drive stops.
Open: Drive disabled. If this input is opened during run,
then the drive will stop as specified by parameter b1-03.
Closed: Ready for operation.
Open: Maintains the current frequency reference
Closed: Increases or decreases the frequency
reference.UP 2 and Down 2 commands must be set in
combination with each other. The frequency reference
source must be assigned to the operator (b1-01 = "0").
Open: KEB Ride-Thru 2 enabled
Closed: Normal operation
Open: Normal operation
Closed: KEB Ride-Thru 2 enabled
Open: Normal operation
Closed: Short-Circuit Braking
Direction of rotation detection (for Simple V/f w/PG)
YASKAWA ELECTRIC TOEP C710606 09B YASKAWA AC Drive V1000 Installation & Start-Up Manual
Description
Open: DWEZ enabled
Closed: DWEZ disabled
Control
Mode
Pg.
V/ O P
f LV M
O O O —
O O O —
O O O —
O O O —
O O - —
O O O —
O O O —
O O O —
O O O —
O O O —
O - - —
O O O —
O O O —
O O O —
O O O —
O O O —
- - O —
- - O —
O - - —
O O O —