Table of Contents
Advertisement
Installing one or more transducers
The transducers you wish to use with the EK80 must be "installed" as a part of the
software configuration. Which transducers to use depends on the number of transceivers
in your system, and the licenses you have for these. Unless you replace a broken
transducer, or add a new, you only need to do this once.
Prerequisites
It is assumed that the EK80 software has been installed, and that all relevant license
strings have been applied. You need to know the type and serial number of each
transducer that you wish to install.
Context
Each transducer is added using the
page is located in the
Installation
You can only choose a transducer from the
system file on your Processor Unit. It contains all the transducers that are compatible
with the transceiver(s) you have. The list also includes technical specifications for each
transducer. You can not see this information, but it is used by the EK80 to set up the
operational parameters. This allows each transceiver to optimise its performance for
the individual transducer models.
If you cannot find your transducer in the list, contact you dealer, agent or Kongsberg
Maritime to upgrade the relevant software component in the EK80.
Note
Just making changes and selecting
Select what to install, define the relevant parameters, and then select
Procedure
1
Open the
Setup
2
On the
menu, select
Setup
Observe that the
of pages selected from the menu on the left side.
3
On the left side of the
4
Select the transducer you wish to install from the
Note
Make sure that you select a transducer that is supported by your current license.
5
Insert the serial number.
401925/C
Transducer Installation
Installation
at the bottom of the page will not install anything.
OK
menu.
Installation
dialog box opens. This dialog box contains a number
Installation
dialog box, select
Installation
page. The
dialog box.
list. The list is generated from a
Model
.
Transducer Installation
list.
Model
Secondary procedures
Transducer
.
Add
.
61
Advertisement
Table of Contents
