Basic Operation; Turning The System On And Off; System Controls Dialog - Simrad NSO evo3S MPU Operator's Manual

2

Basic operation

Turning the system ON and OFF

You can turn the system ON by pressing the power key on the front of the processor, or by
pressing the power key on a remote controller.
You can turn the system OFF by pressing the power key, or by selecting the power button on
the home page or the system controls dialog.
If the power key is released before the shut-down is completed, the power OFF process is
cancelled.
Ú Note:
If the unit is configured as a slave you cannot power OFF the unit by the power
key, and the system controls dialog will not display the power OFF option. Refer to
details in the unit's installation manual.
If a monitor is configured as power master, you can switch OFF the power to the system by
pressing the power key on the monitor. See details in the monitor manual and in the unit's
installation manual.
First time startup
When the unit is started for the first time, or after a reset, the unit displays a series of dialogs.
Respond to the dialog prompts to make fundamental settings.
You can perform further setup and later change settings using the system settings dialogs.
Standby mode
In Standby mode, the backlight for screen and keys are turned off to save power. The system
continues to run in the background.
You select Standby mode from the System Controls dialog.
Switch from Standby mode to normal operation by a short press on the Power key.

System controls dialog

The System Controls dialog provides quick access to basic system settings.
The buttons displayed on the dialog vary with operational mode and connected equipment.
For those functions that toggle on and off, a highlighted button indicates the function is
activated.
Display the dialog by:
• pressing the power key
• selecting the power button from the home page
• swiping down from the top of the screen on application pages
Activating functions
Select the button of the function you want to open, set or toggle on or off. For those
functions that toggle on and off, a highlighted button indicates the function is activated.
Standby mode
In Standby mode, the backlight for screen and keys are turned off to save power. The system
continues to run in the background.
Basic operation | NSO evo3S MPU Operator Manual
15