CAUTION
!
WARNING
!
MOB will not work if the
DANGER
unit does not have a GPS
fix.
CAUTION
CAUTION
!
WARNING
!
Do
not
install
DANGER
through hull transducers
in
solid
wooden
Leakage through the hull
CAUTION
may result.
Do
not
install
transducers in metal hulls.
This will cause electrolytic
corrosion that may result
in damage to the hull or
transducer.
100
19-5 GPS antenna
Installing an antenna
Install the SimNet compatible antenna via the AT40
SimNet converter or SimNet junctions. Refer to the
antenna installation manual
19-6 Installation: Echo transducer
Connect the transducer to the blue unit connector; tighten
the locking collar.
During setup
plastic
•
a) set
hulls.
•
b) set up the echosounder options
bronze
19-7 Installation: petrol sensors
Fit the optional petrol/gasoline fuel kit following the
instructions supplied with the kit.
Note:
•
SmartCraft engines have fuel flow sensors, therefore
Simrad fuel sensors are not required as well.
•
For dual engines, fit two kits.
•
Wire the unit for auto power.
During setup:
a) set the fuel data
Simrad NX40/45 Installation and Operation Manual
to
Echosounder
Blue
White
Echo cable
Fuel sensor cable