How To Access Raw Data Files - Simrad ES70 Operator's Manual

Simrad ES70
4 Click to save the current settings and close the dialog.
OK
5 In the
Operation
Observe that the
→ Replay bar on page 49
6 Click the start button in the
7 To stop the playback, you have two choices:
a Click the stop button in the
Go back to normal operational mode.
b

How to access raw data files

Once raw data files have been recorded, you may also wish to copy or move them from
the computer's harddisk to a separate storage media. This procedure explains how to
access the files, and how to copy them to a separate storage device.
This procedure assumes that you are familiar with the Microsoft
7 operating system utilities for file handling.
1 On the
Status Bar
2 In the browser, click
By default, the folder name is:
Windows XP
Windows 7
3 Use the functionality provided by the operating system to navigate to the file folder
with the raw data files.
This is the folder you selected in the
4 Prepare a separate storage device
This is typically a large capacity USB memory device or a harddisk. You can also
connect the ES70 computer to a network, and copy the files to a server.
5 Use the functionality provided by the operating system to copy or move the files
to the separate storage device.
6 Close the folder.
78
sub-menu, click
Replay
opens.
Replay bar
Replay bar
Replay bar
, click the
Screen Captures
Open Image Folder
c:\documents and settings\All Users\Application
data\Simrad\ES70\ScreenDumps
c:\programdata\Simrad\ES70\ScreenDumps
File Output
to select the function.
to start the playback.
®
tab to open the browser.
to open an operating system folder.
dialog.
XP ® and/or Microsoft
343539/B
®