Adjusting The Position Of The Stapler Paper Stopper - Canon SADDLE FINISHER K3 Service Manual

CHAPTER 3 MECHANICAL SYSTEMS
1.7.2 Adjusting the Position of the
Stapler Paper Stopper
1) Disconnect the finisher from the copier.
2) Move the stapler unit [1] to the middle
of the rail.
3) Loosen the screws ([3], 2 each) on the
stapler paper stopper (left, right; [2]).
4) While lifting the swing guide, insert a
stack of several sheets [4], and butt it
against the rear end stopper [5].
5) While butting the stapler paper stopper
(left, right; [2]) against the stack of
sheets [4], tighten the screw [3].
3-34
COPYRIGHT© 2001 CANON INC.
[3]
[2]
2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
[1]
F03-107-03
[5]
F03-107-04
[2]
F03-107-05
[3]
[2]
[4]
[3] [4]