Other Parts; Pulling Out The Saddle Unit (Service Position); Removing The Grate-Shaped Guide; Removing The Escape Delivery Roller - Canon Staple Finisher-AA1 Service Manual

Other Parts

Pulling Out the Saddle Unit
(Service Position)
■ Procedure
1. Open the front cover [1], and pull out the saddle unit
[2].
[1]
2. Push the plate spring[2] and then pull the saddle
unit[1] to the service position.
[2]
Removing the Grate-shaped
Guide
■ Preparation
1. Remove the front cover.
" Removing the Front Cover" on page 94
2. Remove the front inner cover.
" Removing the Front Inner Cover" on page 95
3. Remove the rear cover.
" Removing the Rear Cover" on page 94
4. Remove the escape tray
"Removing the Escape Tray" on page 96
■ Procedure
1. Remove the grate-shaped guide [1].
[2]
Removing the Escape Delivery
Roller
■ Preparation
[1]
1. Remove the front cover.
" Removing the Front Cover" on page 94
2. Remove the front inner cover.
" Removing the Front Inner Cover" on page 95
3. Remove the rear cover.
" Removing the Rear Cover" on page 94
4. Remove the escape tray.
"Removing the Escape Tray" on page 96
[2]
5. Remove the grate-shaped guide.
"Removing the Grate-shaped Guide" on page 131
■ Procedure
1. Process the harness.
131
4. Parts Replacement and Cleaning
• 2 screws [2]
• 2 hooks [3]
2x
[2]
[3]
• 2 connectors [1]
• 1 wire saddle [2]
• 1 Reuse Band[3]
[1]