Adjusting The Staple Position - Canon Inner Finisher-L1 Service Manual

5. Adjustment
6. Fit the leading edge of the front alignment plate to paper, and confirm that a gap between the adjustment plate and
the paper are 1mm or less at [A] portion.
Paper
[A]
Front Alignment Plate

Adjusting the Staple Position

■ Adjusting the Staple Position
<Use case>
• When the staple position in front/rear direction is displaced in the front/rear 1-stapling mode or 2-stapling mode.
Feed Direction Feed Direction
<Front stapling/Rear stapling> < 2-point stapling>
108