Sony CXD5602 User Manual page 499

20 LPADC_NOT_EMPTY1
19 LPADC_NOT_EMPTY0
18 I2C1_ACTIVE
17 I2C1_MASTER_ON_HOLD
16 I2C1_RX_ALMOST_FULL
15 I2C0_ACTIVE
14 I2C0_MASTER_ON_HOLD
13 I2C0_RX_ALMOST_FULL
12 PWD_I2C_ON_STT
11 PWD_SPI_ON_STT
10 APB_ACCESS_INHIBIT
9..0 EXE_REQ_STT
Indicates that one or more data exist in the FIFO for
RO 0x0
LPADC
Indicates that one or more data exist in the FIFO for
RO 0x0
LPADC
RO 0x0 Indicates the operation active status of I2C1
Indicates that the status is I2C1 TX_FIFO Empty, but a
RO 0x0
STOP command has not been issued
Indicates that more data than designated exist in the RX
RO 0x0
FIFO of I2C1
RO 0x0 Indicates the operation active status of I2C0
Indicates that the status is I2C0 TX_FIFO Empty, but a
RO 0x0
STOP command has not been issued
Indicates that more data than designated exist in the RX
RO 0x0
FIFO of I2C0
RO 0x0 Power supply status of PWD_I2C
RO 0x0 Power supply status of PWD_ SPI
RO 0x0 ORed signal of ACCESS_INHIBIT
RO 0x000 Execution request to each sequencer
－499/1010－
CXD5602 User Manual