Sony CXD5602 User Manual page 912

3.13.4.5 Processor ID
Processor ID register is used for each processor to recognize its own ID. Each processor can obtain its own ID by
accessing the address, which can be seen the same from each processor, to read the register. (Each processor
cannot access the ID of other processors.)
Table 3.31 20 shows Processor ID registers which can be seen from each processor.
Address Register Name
0x0E002040 PID
Processor Name Processor ID
ADSP0 2
ADSP1 3
ADSP2 4
ADSP3 5
ADSP4 6
ADSP5 7
3.13.4.6 Interrupt Controller
The 128 bit interrupt signals are connected to each processor. By using the interrupt controller, confirmation of
the interrupt state, interrupt enable or disable, and the polarity reverse of the interrupt can be performed.
Since the control registers of the interrupt controller for each processor are in the Private Peripheral Bus area, they
can be accessed in Privileged Mode only. For details, refer to Section of Interrupt (3.3).
Table APP-753 Register List
Bit Field Type Bit
Name
PID RO [3:0]
Table APP-754 Processor List
－912/1010－
Initial Description
Value
（ ）
1*
Processor ID
（ ）
1*
Each processor can read the value which are
Table APP-786
indicated in
CXD5602 User Manual
.