Sony CXD5602 User Manual page 107

0x04103444 PMU_WAKE_TRIG1
3.2.4.4.3 Clear of Event Detection
Held statuses of Event Detection can be cleared by registers. If you write "1" on the register, clearing process will
begin. When the process is completed, the value returns to "0" automatically. You need not write "0".
Table General Purpose Input/Output (GPIO)-30 shows registers to clear the status of the Event Detections.
Table General Purpose Input/Output (GPIO)-30 Registers to Clear the Status of the Event Detections
Address Register
Name
0x04103430 PMU_WAKE_TRIG0_CLR
SCU_INT1
SCU_INT0
CRG_INT
Reserved
INT_PMIC_I2CM
UNEXP_PMU
Bit Field
Name
USB_VBUS
USB_VBUS_X
PMIC_INT
SEN_INT
APPGPI5
APPGPI4
APPGPI3
APPGPI2
APPGPI1
APPGPI0
SYSGPI5
SYSGPI4
SYSGPI3
SYSGPI2
SYSGPI1
SYSGPI0
HVDD_DET
HIF_UART_RXD
HIF_SPI_CS_X
HIF_SCL_LOW
HIF_DETECT_I2C_SLAVE
－107/1010－
CXD5602 User Manual
RO [2] 0
RO [1] 0
RO [0] 0
RO [31:2] 0 Reserved
RO [1] 0 Status of Event Detection
1: event is detected
RO [0] 0
0: event is not detected
Type Bit Initial
Value
RW [31] 0
RW [30] 0
RW [29] 0
RW [28] 0
RW [27] 0
RW [26] 0
RW [25] 0
RW [24] 0
RW [23] 0
RW [22] 0
RW [21] 0
RW [20] 0
RW [19] 0
RW [18] 0
RW [17] 0
RW [16] 0
RW [15] 0
RW [14] 0
RW [13] 0
RW [12] 0
RW [11] 0
Description
Held statuses of
Event Detection can
be cleared by
writing "1".