Sony CXD5602 User Manual page 705

3.9.12.10.238 {0x11CC} D0_R0_H_STATUS1 Details
Local Address: 0x11CC
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FIFO_READ_PTR
Bits Name
FIFO_READ_
31..16
PTR
15..12 Reserved
FIFO_READ_
11..8
PHASE
7..6 Reserved
FIFO_EMPT
5
Y_BYTE
FIFO_EMPT
4
Y_SAMPLE
3 FIFO_FULL RO
FIFO_ALMO
2
ST_FULL
FIFO_UNDE
1
R_RUN
FIFO_OVER_
0
RUN
Table SCU (Sensor Control Unit)-567
Reset
Type Description
Value
Readout pointer address in the FIFO
RO 0x0000 The next data is read out on the start address
Byte unit
RO 0x0 Reserved
Readout phase of the data in the FIFO
The data position in a sample data stored in the FIFO
RO 0x0
(by Byte unit)
"0" indicates that it is delimited of the sample data.
RO 0x0 Reserved
Indicates "1" when the number of the valid data byte in the
RO 0x0
FIFO is "0"
Indicates "1" when the number of the valid data sample in the
RO 0x0
FIFO is "0"
0x0 Indicates "1" when the FIFO is full
Indicates "1" when the number of the valid data in the FIFO is
RO 0x0
WATER_MARK or more
Indicates "1", when the number of the valid data in the FIFO is
RO 0x0
"0" and the FIFO data is read out.
Indicates that the write occurs at FIFO full
RO 0x0 Indicates "1" if the write occurs in the FIFO when the FIFO is
full
Register Type: RO (read only)
Reset Value: 0x00000000
Reserved
－705/1010－
CXD5602 User Manual