Sony CXD5602 User Manual page 802

SCU_FIFO_COPY_INFO_n
3.9.12.11.1 SCU_SW_REVISION_DATE
OFFSET: 0x0000
NAME
SCU_SW_REVISION_DATE
This parameter must be written during startup of the internal sequencer and cannot be updated later.
3.9.12.11.2 SCU_SW_REVISION_TIME
OFFSET: 0x0004
NAME
SCU_SW_REVISION_TIME
This parameter must be written during startup of the internal sequencer and cannot be updated later.
3.9.12.11.3 SCU_SW_REVISION_GIT_HASH
OFFSET: 0x0008
NAME
SCU_SW_REVISION_GIT_HASH
This parameter must be written during startup of the internal sequencer and cannot be updated later.
0x0314 + n x 0x04 RW
Table SCU (Sensor Control Unit)-683
Field Name Bit
[31:0]
Table SCU (Sensor Control Unit)-684
Field Name Bit
Reserved [31:24]
[23:0]
Table SCU (Sensor Control Unit)-685
Field Name Bit
Reserved [31:28]
[27:0]
－802/1010－
For debugging
Copy enable flag and copy destination Write FIFO ID of
write partition
RW Description
RO Year, month, and date that SCU SW was built. The
YYYYMMDD can be obtained on hexadecimal. (E.g.
20140819)
RW Description
Reserved
RO Time that the SCU SW was built. The HHMMSS can
be obtained in hexadecimal. (E.g. 100615)
RW Description
Reserved
RO Configuration management information of the SCU
SW. The leading seven characters of the git hash value
can be obtained in hexadecimal. (E.g. 8b447cd)
CXD5602 User Manual