Sony CXD5602 User Manual page 239

DESTME RW [25]
MBURST
SRCMEM RW [24]
BURST
Reserved RO [23:19]
HALT RW [18]
ACTIVE RW [17]
LOCK RW [16]
ITC RW [15]
IE RW [14]
FLOWCN RW [13:11]
TRL
Reserved RO [10]
DESTPERI RW [9:6]
PHERAL
Reserved RO [5]
SRCPERIP RW [4:1]
HERAL
E RW [0]
－239/1010－
CXD5602 User Manual
0 Sets access of the AHB port, which is set
as the memory access of the Destination
side, so that it always conforms to the
burst length set by DBSize. This is used to
raise the efficiency of memory access.
However, since the FIFO size is 16/32/64
byte, 4/8/16 burst is the largest number of
bursts in word size.
Be cautious with the DBSize setting of the
Channel Control register.
0 Sets access of the AHB port, which is set
as the memory access of the Source side,
so that it always conforms to the burst
length set by SBSize. This is used to raise
the efficiency of memory access.
However, since the FIFO size is 16/32/64
bytes, 4/8/16 burst is the largest number
of bursts in word size.
Be cautious with the SBSize setting of the
Channel Control register.
0 Reserved
0 Same as PL080
0 Same as PL080
0 When this bit is set, locked transfer
(HLOCK=H) is performed.
0 Same as PL080
0 Same as PL080
0 Same as PL080
0 Reserved
0 Same as PL080
0 Reserved
0 Same as PL080
0 Same as PL080