Table of Contents
Advertisement
OVERHAUL
NOTICE:
Y
When using a vise, do not overtighten.
Y
When installing, coat the parts indicated by the arrows with power steering fluid
(See page
51–18).
1.
REMOVE V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
(See page
55–46)
2.
REMOVE ENGINE COVER NO.1
(a)
Remove the bolt, 4 nuts and the engine cover No. 1.
3.
DISCONNECT OIL RESERVOIR TO PUMP HOSE NO.1
(a)
Remove the clip and disconnect the oil reservoir to pump hose No. 1.
NOTICE:
Take care not to spill fluid on the V belt.
7.
REMOVE POWER STEERING SUCTION PORT UNION
(a)
Remove the bolt and the suction port union.
(b)
Remove the O–ring from the suction port union.
AVENSIS REPAIR MANUAL (RM1018E)
POWER STEERING
4.
(a)
(b)
SST(s)
D30579
5.
(a)
D30580
6.
(a)
SST(s)
C84636
http://vnx.su
–
VANE PUMP ASSY (1CD–FTV)
DISCONNECT PRESSURE FEED TUBE ASSY
Remove the bolt and sepatate the tube clamp.
Using SST(s), disconnect the pressure feed tube assy
from the vane pump assy.
SST
09023–12700
REMOVE VANE PUMP ASSY
Remove the 4 bolts, the vane pump assy and the vane
pump bracket rear.
FIX VANE PUMP ASSY
Using SST(s), hold the vane pump assy in a vise.
SST
09630–00014 (09631–00132)
51–19
510DH–02
Advertisement
Table of Contents
