Table of Contents
Advertisement
30–22
DRIVE SHAFT / PROPELLER SHAFT
REPLACEMENT
HINT:
Replace the RH side by the same procedures as the LH side.
1.
REMOVE FRONT WHEEL
2.
SEPARATE FRONT STABILIZER LINK ASSY LH
FE)((-
AVENSIS REPAIR MANUAL (RM1018E)
3.
REMOVE FRONT AXLE HUB LH NUT
(a)
Using SST and a hammer, unstake the staked part of the
axle hub LH nut.
SST
SST
(b)
While applying the brakes, remove the axle hub LH nut.
F45751
4.
DISCONNECT SPEED SENSOR FRONT LH
(a)
Remove the bolt, and disconnect the speed sensor wire
and flexible hose from the shock absorber.
C80291
(b)
Remove the bolt, separate the speed sensor front LH
from the steering knuckle.
NOTICE:
Y
Be careful not to damage the speed sensor.
Y
Prevent foreign matter from attaching to the speed
sensor.
F44775
5.
SEPARATE FRONT DISC BRAKE CALIPER ASSY LH
(a)
Removing the 2 bolts, separate the disc brake caliper
assy LH from the steering knuckle.
NOTICE:
Use a string or other device to keep the brake caliper from
hanging down.
C67088
http://vnx.su
–
FRONT AXLE HUB SUB–ASSY LH
(See page
30–6)
09930–00010
300JY–01
Advertisement
Table of Contents
