Toyota Avensis ZZT251 2003 Service And Repair Manual page 1682

72–14
Hog Ring Pliers
22. INSTALL FRONT SEAT INNER BELT ASSY LH
(a) Install the inner belt with the nut.
Torque: 42 N m (428 kgf cm, 31 ft lbf)
(b) Connect the connectors.
(c) Check that the inner seat belt moves smoothly.
23. INSTALL FRONT SEAT ASSY LH
(a) Place the seat in the cabin.
(b) Connect the connectors under the seat.
(c) Install the seat with the 4 bolts.
Torque: 37 N m (375 kgf cm, 27 ft lbf)
(d) Install the 4 seat track covers.
(e) Install the headrest.
24. INSPECT POWER SEAT OPERATION
AVENSIS REPAIR MANUAL (RM1018E)
SEAT
(g)
NOTICE:
Be careful not to damage the cover.
(h)
Clamp
B65611
21.
(a)
(b)
NOTICE:
Y
Y
B50126
(See page
http://vnx.su
– FRONT SEAT ASSEMBLY LH (POWER SEAT TYPE)
w/ Side airbag:
Install the wire harness and clamp of the side airbag
through the seat cushion cover end.
Install the seatback board with the 2 screws.
INSTALL SEPARATE TYPE FRONT SEAT CUSHION
COVER
Install the seat cushion pad to the seat cushion cover.
Using hog ring pliers, install the seat cushion cover with
new hog rings to the seat cushion pad.
Be careful not to damage the cover.
When installing the hog rings, take care to prevent
wrinkles as much as possible.
72–4)