Toyota Avensis ZZT251 2003 Service And Repair Manual page 1202

42–8
LHD Steering Position Type:
RHD Steering Position Type:
MP Grease
AVENSIS REPAIR MANUAL (RM1018E)
CLUTCH – CLUTCH PEDAL SUB–ASSY (MTM)
12. REMOVE CLUTCH PEDAL NO.1 CUSHION
(a) LHD steering position type:
Using needle–nose pliers, remove the No.1 cushion from
the clutch pedal.
(b) RHD steering position type:
Using needle–nose pliers, remove the 2 No.1 cushions
from the clutch pedal.
D30779
13. REMOVE CLUTCH MASTER CYLINDER PUSH ROD
CLEVIS BUSH
(a) Using a 8 mm hexagon wrench and a hammer, remove
the clevis bush from the clutch pedal.
D30777
14. INSTALL CLUTCH MASTER CYLINDER PUSH ROD
CLEVIS BUSH
(a) Apply MP grease to the inside of a new clevis bush.
(b) Install the clevis bush to the clutch pedal.
HINT:
Install the clevis bush from the right side of the vehicle.
D30778
http://vnx.su