Table of Contents
Advertisement
65–10
3.
FRONT DOOR COURTESY LAMP SWITCH ASSY
(a)
Check that there is continuity between the terminal and the switch body when the switch is operated.
Standard:
ON (When shaft is pressed): No continuity
OFF (When shaft is not pressed): Continuity
4.
REAR DOOR COURTESY LAMP SWITCH ASSY
(a)
Check that there is continuity between the terminal and the switch body when the switch is operated.
Standard:
ON (When shaft is pressed): No continuity
OFF (When shaft is not pressed): Continuity
AVENSIS REPAIR MANUAL (RM1018E)
LIGHTING
–
LIGHTING SYSTEM
(b)
Inspect illumination operation.
(1)
Connect the positive (+) lead from the battery to the
terminal 8 and negative (–) lead to the terminal 9,
then check that the illumination comes on.
5.
BACK DOOR LOCK ASSY (WAGON MODELS)
(a)
Inspect back door courtesy lamp switch operation.
(1)
Check that there is continuity between the terminal
1 and the terminal 2 when the back door is open and
closed.
Standard:
Back door is open: No continuity
Back door is closed: Continuity
I30905
6.
BACK DOOR LOCK ASSY (LIFTBACK MODELS)
(a)
Inspect back door courtesy lamp switch operation.
(1)
Check that there is continuity between the terminal
1 and the terminal 2 when the back door is open and
closed.
Standard:
Back door is open: No continuity
Back door is closed: Continuity
I30905
7.
HEADLAMP RELAY
(a)
Inspect relay continuity.
Standard:
Condition
Always
Always
Apply B+ between
the terminal 1 and 2
E64835
http://vnx.su
Tester connection
Specified condition
1 – 2
3 – 5
No continuity
3 – 5
Continuity
Continuity
Advertisement
Table of Contents
