Rear Suspension Arm Assy No. 1 Lh Overhaul - Toyota Avensis ZZT251 2003 Service And Repair Manual

REAR SUSPENSION ARM ASSY NO.1 LH
OVERHAUL
HINT:
COMPONENTS: See page
1. REMOVE REAR WHEEL
AVENSIS REPAIR MANUAL (RM1018E)
REAR SUSPENSION
27–2.
2. SEPARATE PARKING BRAKE CABLE ASSY NO.3
(a) Remove the 2 bolts, and separate the parking brake cable
assy No.3.
G23867
3. DISCONNECT SKID CONTROL SENSOR WIRE
(a) Disconnect the skid control sensor connector.
(b) Remove the bolt and wire bracket.
G25771
4. SEPARATE REAR STABILIZER LINK ASSY LH
(a) Remove the nut, and separate the rear stabilizer link assy
LH.
HINT:
If the ball joint turns together with the nut, use a hexagon (5 mm)
wrench to hold the stud.
G25772
5. REMOVE LOWER CONTROL ARM ASSY LH
(a) Support the rear suspension arm assy No.1 LH.
G25775
http://vnx.su
– REAR SUSPENSION ARM ASSY NO.1 LH
27–15
270E3–01