75–10
Butyl Tape
11.
REMOVE FRONT DOOR BELT MOULDING ASSY LH
12.
REMOVE FRONT DOOR STIFFENER CUSHION NO.1
(a)
Using a screwdriver, disengage the 2 claws and remove the cushion.
13.
REMOVE FRONT DOOR SPACER LH
(a)
Using a screwdriver, disengage the 2 claws and remove the spacer.
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE HOOD/DOOR
–
FRONT DOOR
8.
REMOVE FRONT DOOR SERVICE HOLE COVER
(a)
Remove the service hole cover.
NOTICE:
Remove the tape remaining on the door side.
B69067
(b)
Remove the lower frame seal.
B66981
9.
REMOVE OUTER REAR VIEW MIRROR ASSY LH
(a)
Disconnect the mirror connector.
(b)
Remove the 3 screws and mirror.
NOTICE:
When the screws are removed, the mirror may fall and be-
come deformed.
B68929
10.
REMOVE FRONT NO.1 SPEAKER ASSY (W/
SPEAKER)
(a)
Using a drill of less than ø 4 mm (0.16 in.), drill out the 3
rivets heads and remove the speaker.
NOTICE:
Y
Prizing the hole with a drill can lead to damage to the
rivet hole or breaking the drill.
Y
Be careful with the cut rivet, because it is hot.
(b)
Even if the flange is taken off, continue drilling and push
B61431
out the remaining fragments using the drill.
(c)
Using a vacuum cleaner, remove the drilled rivet and dust
from the inside of the door.
http://vnx.su
(See page
76–23)