Table of Contents
Advertisement
SST
10 m or more
(e)
Activate the seat belt pretensioner.
(1)
Confirm that no one is inside the vehicle or within 10 m (33 ft) of the vehicle.
(2)
Press the SST activation switch and activate the seat belt pretensioner.
HINT:
The seat belt pretensioner operates simultaneously with the LED light for the SST activation switch.
(f)
Dispose of the outer belt (with the seat belt pretensioner).
CAUTION:
Y
The outer belt is very hot when the seat belt pretensioner is activated, so leave it untouched
for at least 30 minutes after it has been activated.
Y
Use gloves and safety glasses when handling the outer belt with a pretensioner that has been
activated.
Y
Always wash your hands with water after completing operation.
Y
Do not apply water, etc. to an outer belt with a pretensioner that has been activated.
HINT:
When scrapping a vehicle, activate the seat belt pretensioner, and then scrap the vehicle with the activated
outer belt being installed.
2.
DISPOSE OF FRONT SEAT OUTER BELT ASSY RH (WHEN NOT INSTALLED IN VEHICLE)
NOTICE:
Y
When disposing of the front seat outer belt (with the seat belt pretensioner) only, never use the
customer's vehicle to activate the seat belt pretensioner.
Y
Be sure to follow the procedures listed below when activating the seat belt pretensioner.
(a)
Remove the outer belt
HINT:
Cut the belt near the seat belt retractor.
AVENSIS REPAIR MANUAL (RM1018E)
SEAT BELT
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
SST
B51763
NOTICE:
Take care not to damage the SST wire harness.
B50513
(See page
61–7).
http://vnx.su
–
FRONT SEAT BELT
(2)
Connect SST, then connect them to the seat belt
pretensioner.
(3)
Move the SST at least 10 m (33 ft) away from the
front of the vehicle.
(4)
Close all the doors and windows of the vehicle.
(5)
Connect the SST red clip to the battery positive (+)
terminal and the black clip to the negative (–) termi-
nal.
61–11
Advertisement
Table of Contents
