Table of Contents
Advertisement
16–24
RADIATOR ASSY (1AZ–FE)
REPLACEMENT
1.
DRAIN COOLANT
2.
REMOVE RADIATOR SUPPORT OPENING COVER
3.
REMOVE ENGINE ROOM COVER SIDE
4.
REMOVE ENGINE UNDER COVER RH
5.
DISCONNECT RADIATOR HOSE INLET
6.
DISCONNECT RADIATOR HOSE OUTLET
7.
REMOVE RADIATOR SUPPORT UPPER
(a)
Disconnect the fan w/ motor wire harness, connector and the horn connector.
(b)
Remove 4 bolts, the nut and the radiator support.
8.
REMOVE RADIATOR ASSY
(a)
Remove 2 upper support, and radiator assembly
9.
REMOVE RADIATOR SUPPORT LOWER
10.
REMOVE FAN ASSY W/MOTOR
(a)
Remove 6 bolts and fan w/motor.
11.
INSTALL FAN ASSY W/MOTOR
12.
INSTALL RADIATOR SUPPORT LOWER
13.
INSTALL RADIATOR ASSY
14.
INSTALL RADIATOR SUPPORT UPPER
(a)
Install radiator support with 2 bolts.
Torque: 19 N m (194 kgf cm, 14 ft lbf)
15.
ADD COOLANT
16.
INSPECT CHECK FOR ENGINE COOLANT LEAKS
AVENSIS REPAIR MANUAL (RM1018E)
COOLING
(See page
16–19)
(See page
16–19)
http://vnx.su
–
RADIATOR ASSY (1AZ–FE)
(See page
16–13)
160MX–01
Advertisement
Table of Contents
